[an error occurred while processing this directive]
Ingeania contains the following structural section types.
I | I, h, b, tf, tw, r | |
I (ASYMMETRIC) | I_ASYM, h, b1 ,b2, tf1, tf2, tw | |
BOX | BOX, h, b, tf, tw | |
BOX (ASYMMETRIC) | BOX_ASYM, h, b, tf1, tf2, tw1, tw2 | |
PIPE | PIPE, d, t | |
RECTANGULAR | RECT, h, b | |
CIRCULAR | CIRC, d | |
CHANNEL | CH, h, b, tf, tw | |
CHANNEL (ASYMMETRIC) | CH_ASYM, h, b, tf1, tf2, tw | |
ANGLE | ANG, h, b, tf, tw |
Parameter | Description | Units |
ID | Sequence index | |
NAME | Name of the Section | |
NAME_SI | Name of the Section in SI Units | |
G | Weight of the Section | kg/m |
D_o | Outer diameter of tubular | m |
t | Thickness of tubular | m |
D_o_t | Ratio of outer diameter to thickness of tubular | |
h | Depth of section | m |
b | Breadth of section | m |
t_w | Thickness of web | m |
t_f | Thickness of flange | m |
r | Root radius | m |
r_1 | Root radius (of taper flange section) | m |
r_2 | Toe radius (of taper flange section) | m |
A | Area | m2 |
h_i | Distance between flanges i.e. web height including radii | m |
d | Distance between radii i.e. web height excluding radii | m |
BOLT_DIAM | Bolt diameter | |
p_min | Minimum spacing between flange bolt holes | m |
p_max | Maximum spacing between flange bolt holes | m |
A_L | Surface area per unit length | m2/m |
A_G | Surface area per unit weight | m2/kg |
I_y | Second moment of area about major axis | m4 |
W_el_y | Elastic section modulus about major axis | m3 |
W_pl_y | Plastic section modulus about major axis | m3 |
i_g_y | Radius of gyration about major axis | m |
A_vz | Shear area parallel to minor axis | m2 |
I_z | Second moment of area about minor axis | m4 |
W_el_z | Elastic section modulus about minor axis | m3 |
W_pl_z | Plastic section modulus about minor axis | m3 |
i_g_z | Radius of gyration about minor axis | m |
S_s | ||
I_t | Torsion constant | m4 |
I_w | Warping constant | m6 |
CL_EC3_PB_S235 | Classification to EC3 for pure bending if S235 steel | |
CL_EC3_PB_S355 | Classification to EC3 for pure bending if S355 steel | |
CL_EC3_PB_S460 | Classification to EC3 for pure bending if S460 steel | |
CL_EC3_PC_S235 | Classification to EC3 for pure compression if S235 steel | |
CL_EC3_PC_S355 | Classification to EC3 for pure compression if S355 steel | |
CL_EC3_PC_S460 | Classification to EC3 for pure compression if S460 steel |